THE TROLLING IS SUCCESSFUL FROM EVERY BOAT
Trolling
Trolling is a method of fishing that is often perceived as an expensive, hobby for adults. While the hobby has evolved with new tools and technologies, you can get started with any boat and one rod. Trolling is often done with the help of a motor, but it is also possible to do it by rowing. Thus, trolling can be practiced with its simplest rowing boat and one open or closed reel platform. This hobby is easy to start and is a form of fishing for the whole family and a hobby where lures are pulled behind the boat. Finland's thousands of lakes and vast sea area offer excellent and varied opportunities for this form of fishing, which is why the hobby has become a favorite of many.
Typical gear is Perch, Pike, Trout, and Salmon. All of these fish species are widely found in Finnish and European lakes and the sea. From early spring to late fall, the troller often chases the delicacies of precious fish, i.e. lake salmon, lake trout, sea salmon and sea trout, allowing the water to be cooler and salmonids to meet from surface waters. In the hot water of midsummer, the salmonids are in deep, cooler water, and these salmonids are often trolled with a deep wedge to get the lure deep enough. In the summer and early fall, trollers focus on fishing for pike, pikeperch and perch. Especially the night time in summer-July is the best time to fish for pikeperch, when flocks of pikeperch rise close to the surface as they chase small schools of fish. The pike eats vigorously in the warm water of mid-summer (19-21 ° C), giving it most of the weight gain.
BOAT RAILS WITH RODHOLDERS
A really wide range of ready-made solutions for different boat models.
ADD FEATURES: The design, make and size of a boat often affect how well the boat is suitable for trolling or casting. With the help of Bonete handrail packages, the suitability of each boat for fishing can be improved. A simple and quick way to add a fishing feature to a rowing boat or big boat, for example. Even more broadly, this solution works great on any boat to which the railings can be attached (from below or above) firmly enough. An excellent solution also for the inside of a rowing boat, so that the free racks can be adjusted / attached to many different places also in the longitudinal direction of the boat. All ready-made packages are based on a sturdy 25mm boat rail, which is sold with different free racks or free tubes.
ADD COMFORT: Trolling is much easier when the rods can be attached to the boat firmly, in the right place, and of course in the right position. This way, the rods should no longer be in the crotch or hands at all times. Convenience is also increased by the storage space during transport, so that the rods no longer hang on the boat floor.
ADD SAFETY: Bonete boat railings are the highest on the market, so boating is safer as the height increases. In addition to this, it is easy to hold the handrail firmly, and it is easier to stay in the boat seat even in high waves.
ADD VALUE: A multi-purpose boat is suitable for wider use, which typically increases its service life. A more versatile boat is suitable for more users, so it is usually also easier to sell. In addition to this, the purchase price of the products can be recovered through a better resale price almost whenever you sell the boat.
ADD ANYWHERE: It's really easy to add Freewheels and racks to the railings that attach to your boat. They are also just as easy to remove if there is no use for free racks. In this case, the handrails still provide additional security and can be fitted with something else useful, such as cup holders or fenders.
HIGH HANDRAILS WITH RODHOLDERS
- The handrail is so high that the center-mounted RST free pipe can be placed at almost any angle and even under the handrail.
- Number of free tubes in delivery: 500mm / 2pcs, 750mm / 3pcs, 1000mm / 4pcs
- The free tube is made of stainless steel and the handrail is made of stainless steel
LOW HANDRAILS WITH RACKS
- Number of free racks in delivery: 500mm / 2pcs, 750mm / 3pcs, 1000mm / 4pcs
- The free frame is made of stainless steel / PE plastic and the handrail is made of acid-resistant stee
Standard lengths: 500mm, 750mm, 1000mm.
Standard heights: 100mm and 150mm.
PRICES OF PREPARED SOLUTION
High handrails with SST -rod holders
starting at 80€
Low handrails with racks
starting at 80€
ROD HOLDERS
The first height-adjustable and 360-degree swivel rod holders on the market. The PRO2 free tube is also available with a 30mm handrail bracket.
ADD FEATURES: The design, make, and size of a boat often affect what kind of free tube fits into it. Bonete free pipes are designed to be used as widely as possible. In this case, the same free holder can be installed and / or adjusted in as many places as possible.
ADD COMFORT: Trolling is much easier when the rods can be attached to the boat firmly, in the right place, and of course in the right position. Convenience is also increased by storage space during transport, so the rods no longer hang on the boat floor. Jiggers can have several rods on the boat trip, so the rods can be used to create good storage places for them.
ADD SAFETY: A rod attached to a boat is significantly safer than a rod held in the crotch or in the hands, especially when the boat is rowing or motorized. It is a good idea to have a storage space for rods, because a rod stored on the floor also increases the safety risk when moving in a boat.
ADD VALUE: Thanks to the wide adjustment range, the same free tube is suitable for many different situations and locations, so it is possible to attach it to a new location when the purpose or even the boat changes.
ADD ANYWHERE: Free pipes can be attached to either the 25mm or 30mm round pipe, which is a typical standard on almost all boats made in Europe. It is fastened with two bolts, so removal and fastening is very quick and effortless.
PRO360 ROD HOLDER
- Diameter 50 mm and length 250 mm.
- Made of austenitic (magnet does not stick) stainless steel, which is finished by pickling.
- The bottom has a removable stainless-steel bolt and nut, which can be removed if desired, making the product also suitable for litter storage.
- Designed in Finland
- It is also ideal for a vertical pipe, which makes it easy to install two additional lugs in the smart arc.
- The same product can be attached with either an upper or lower attachment to a 25mm pipe.
- The first stepless, full 360-degree adjustable free tube on the market.
PRO2 ROD HOLDER
- Finished by electrolytic polishing
- Length 250mm, diameter 50mm, weight> 500g
- Material 316L low carbon stainless steel
- A design-protected solution designed in Finland
- Aluminum / plastic mounting stafe option
- Mounting on 25-30mm round steel / models 25 and 30mm
- The bottom has a removable acid-proof (HST) bolt and nut that can be removed if desired
- Infinitely variable mounting height adjustment with a really wide adjustment range
LIGHT ROD HOLDER
- Finished by electrolytic polishing
- Length 250mm, diameter 40mm, weight 350g
- Material stainless steel
- A design-protected solution designed in Finland
- Aluminum / plastic mounting stage option
- Fastening to 25 round steel
- The bottom has a removable stainless-steel bolt and nut that can be removed if desired
- Infinitely variable mounting height adjustment with a really wide adjustment range
PRICES OF ROD HOLDERS
PRO 360 rod holder
Stainless steel pipe with diameter of 50mm
20€
LIGHT rod holder
Stainless steel pole with diameter of 40mm
starting at 19,90€
PRO2 rod holder
AISI 316L acid proof pole with diameter of 50mm
starting at 36,90€
FISHING FRAMES
The widest range of fishing racks on the market.
ADD FEATURES: The design, make and size of the boat always affect the shape and size of the freeboard. Bonete freestanding racks are designed so that they can be adjusted as widely as possible. Thanks to the design, the same free stand fits in as many places as possible. In addition, the PRO2MOD series free racks can be easily upgraded with new parts.
ADD COMFORT: The number of trolling rods is directly proportional to the security of the fish and the amount of catch. An orthodox free rack significantly facilitates the use and storage of several rods during transport. Jiggers can have several rods on the boat, so a suitable rod holder can be used to build good storage places for all rods.
ADD SAFETY: Trolling rods and several jig fishing rods must have a suitable storage location, as rods and reels stored on the floor pose a significant safety risk when moving in a boat.
ADD VALUE: Thanks to the wide adjustment range, the freewheel is suitable for many different situations and locations, so it is possible to attach it to a new location when the purpose or even the boat changes. Other boat accessories such as a solar panel or lights can also be attached to the freeboard.
ADD AT ANY TIME: The freestand is often installed on the boat's scrapers, sides, or own railings, (i.e. they are also easy / quick to remove if necessary).
HARD TOP BOAT FISHING FRAMES
A really wide range of different HT free racks with or without free tubes, mast tubes, planar reels.
The fishing frame Bonete PRO2MOD is a revamped and improved version of the popular PROtarga series that can be built like lego blocks. The product is made entirely of acid-resistant steel, which makes it also suitable for Arctic use.
Features
- The material is an acid-resistant 316L low carbon blade
- Round steel diameter 25mm, which is standard in boat equipment
- Material thickness 1.25mm, which withstands high tensile forces
- The product is easy to upgrade with new parts
ROWBOAT FISHING FRAME
The rowing boat's free stand is a design-protected product to which the desired number of free tubes can be attached and the free tube can be adjusted to just the right position (and the rod tip does not stay too high above the water surface).
The stand must be removable and mounted on the scrubbers. It can be mounted in either a vertical or horizontal position, allowing for the best fishing in all rowing boats.
The middle tube has a 25mm round RST profile and can be attached to all standard size Free Tubes. A really working solution, for example, a line glider in use. Rods of the same length work because the rod tips in the middle are higher than the outermost rods.
OPEN BOAT FISHING FRAMES
Open boat fishing frames in the finished product package or individually.
The products made by professionals are made in the factory, so all welds and workmanship are excellent. The material is either austenitic (magnet does not stick) stainless steel or acid-resistant AISI 316 L steel.
Installation takes place either on the 25mm / 30mm handrail using the stafts included in the product package or directly on the side of the boat. Detailed installation, reduction and assembly instructions can be found on the Internet (link provided in the sales package).
The arch has a height of about 1100mm and is available in several different widths.
FISHING FRAME PRICES
Hard Top boat
Very wide offering of fishing frames
starting at 129€
Rowboat
Fishing frame with many rodholder options
starting at 99€
Open boat
Many options of fishing frames with or without the rod holders
starting at 140€
MOUNTING BASE
Versatile Bonete PRO2MOD mounting bases for every boat type.
MOUNTING BASE FOR SONARS
Quick-mount and adjustable sonar sensor racks for every need.
MOUNTING BASE FOR DOWNRIGGER
Extremely strong deep wedge mounting brackets for all deep wedge models.
PRICES OF MOUNTING BASE
For sonars
Wide adjustment options, easy quick month options, durable
starting at 119€
For downriggers
Fits for 25mm pole, very stable lay-outs
starting at 79€
Universal usage
Adjustable, fixing to 25mm pole
starting at 99€
MAST TUBES
Mast tubes are a functional solution for trolling with big side planers
ADD FEATURES: The planar mast leaves the planar rope higher than the water level, resulting in a steeper angle between the boat and the planar sled. This makes planar launchers slide much easier / faster from boat to plane, which of course increases lure fishing time.
ADD COMFORT: The mast is easy to attach exactly where you want it, as long as the position is 25mm round steel.
ADD SAFETY: The rope that goes through the planar masts leaves the boat higher, so it's easy to spot even from a boat moving far away. This makes it easier for the second boat to spot the planar sleds floating in the water, so that it can pass the trolling boat far enough.
ADD AT ANY TIME: The planar mast is easily mounted on the vertical bar with two 25mm handrail brackets. The handrail brackets are fastened with 4 bolts, so they are also very easy and quick to remove when needed.
MAST TUBE
FEATURES
- Removability allows products to always be attached where they work best, providing the best fishing experience
- The product can be easily loosened with 4 nuts and lowered. This makes it easier to transport and store the boat, even in shallow places
Tekniset ominaisuudet
- Finished by pickling and hand polishing
- Made in a factory specializing in the manufacture of stainless steel.
- Made of 1.5mm thick stainless steel material
- The planar mast measures 800mm and raises to about 600mm
PRICES OF MAST TUBE